So you’ve just received your Glo Nano hyper+, a new tobacco heating device that emits fewer toxins than a cigarette. What happens next? This manual will teach you all you need to know about using and maintaining your gadget.
How to Use Your Glo Nano?
First and foremost, take it out of the box! You need to have the following items:
• Your Glo Nano hyper+ gadget
• A USB-C cable
• A cleaning brush.
Please let us know if something is missing!
Charging Your Glo Nano Hyper+ Heating Device for Tobacco
Before you begin, charge your device by inserting the USB-C cable into the Glo Nano Hype’s charger connector and connecting it to your computer’s USB port. It should take between 2 and 4 hours to fully charge the smartphone. The control button’s LEDs will indicate how much charge the battery has. Unfortunately, the gadget cannot be used while charging.
Next, the Neo Sticks
Once your gadget has been charged, take out one of your Neo sticks, which are tobacco rods created specifically for the Glo Nano. To insert a Neo stick, open the device’s shutter and gently insert the stick with a small twisting motion. When the coloured collar on the stick is no longer visible, it signals the stick has reached the device’s bottom -and you’re ready to go!
Turning On the Glo Nano
The Glo Nano hyper+ is simple to use; you can perform anything with a single press of the Glo Nano button. The gadget offers two heating modes: standard and boost. Standard mode is enabled after 3 seconds of pressing the Glo Nano button, while Boost mode is engaged after 5 seconds of pressing and feeling the second vibration. The tobacco takes 20 seconds to heat in Standard mode and 15 seconds in Boost mode. The Glo Nano button will flash, and the gadget will vibrate slightly when the device is ready to use after heating.
Relax and Enjoy
To begin your session, just put the Neo stick to your lips and inhale slowly, like you would a cigarette. Each session lasts around 3 minutes, and three of the four lights turn off about 20 seconds before the session ends. You cannot stop your session. However, you may cancel it by pushing the Glo Nano button for 3 seconds throughout the session, which turns the gadget off. When your session is over, just remove your neo stick and dispose of it properly in a bin or ashtray. After each session, be sure you close your device’s shutter.
How to Keep Your Glo Clean?
Every few sessions, remove any collected moisture from your Glo Nano and clean the whole heating channel after around 20 sessions. Here’s how to maintain your Glo Nano in tip-top shape for the ideal session:
1. Open the slide lock on the top side of your tobacco heating device and the cleaning flap lock on the beneath.
2. Using a clean cloth, remove any moisture that has accumulated on the device’s bottom and the cleaning flap.
3. Insert the cleaning brush (included in the package) through both the opening cleaning flap and the opened sliding lock to clean the heating channel. To clean everything, give the brush a little twist.
4. When you’re through cleaning, close the sliding lock and the cleaning flap again.
5. Rinse and dry the cleaning brush under running water. Before cleaning again, make sure the brush is totally dry.